Air Conditioning Installation Tips – Make The Best Choice

Whether you want to upgrade to a better and more efficient air conditioning unit or you are just starting off with air conditioning installation for your home, you will obviously have to consider a myriad of factors to make the right choice. The good thing is that there are a couple of options to consider when it comes to air conditioning installation, some of which are inexpensive and easy to installation. For some options, however, installation and purchase can be expensive but the overall cost of operation tends to be less costly.

All in all, some of the most important factors to look at when choosing an air conditioner for your home include type, capacity, and ease of use, features, cost, energy efficiency, and operational convenience, among others. Factors such as air conditioner ductwork and ventilation and portability are also worth considering before choosing your home’s unit. With regards to this, below are 4 helpful air conditioning installation tips for choosing a central AC unit homeowners should know.

1. Size and Capacity
Even though some sources may tell you otherwise, the size and capacity of your AC unit in relation to that if your home matters when it comes to cooling effectiveness. If too big or too small, the air conditioner may be more prone to some common air conditioning problems homeowners encounter. Some of these include rapid cycling for oversized units. When the unit has inadequate capacity to distributed conditioned air throughout your home, it may end up struggling to meet your cooling demands, thus subjecting it to operational stress and making it more prone to mechanical failures and reduced lifetime. In most cases, the air conditioner unit’s capacity is expressed in tons or BTUs per hour, where the higher the number, the higher it’s cooling capacity. According to energystar.gov, a 1,200- to 1,400- sq ft room would require an air conditioner with a capacity of up to 23,000 BTUs per hour.

2. Operational Noise
Depending on the type and model, operational noise levels may vary from AC to AC. However, some of the best options produce a noise so low that you will only hear the sound produced when the fan is running. You do not want an AC unit that produces so much noise to disrupt your sleep at night so choose wisely.

3. Energy Efficiency
The good thing about air conditioning units nowadays is that in the US, the federal government requires manufacturers to include the unit’s energy rating, which is a measure that displays the AC’s energy efficiency for the consumer to choose right. As opposed to the SEER rating, energy efficiency is measured by the Energy Efficiency Ratio or EER, which represents the unit’s cooling capacity ratio to the energy required to run it. Some of the most energy efficient systems have an EER or between 9 and 12. The thing is; higher energy efficiency units may cost higher to purchase but will eventually save you more during its lifetime.

4. Cost and Features
As revealed above, the upfront costs of an AC system may depend on the type, energy efficiency, cooling capacity, and size. However, the cooling and operational features will also determine the cost you pay for upfront. Modern variants are equipped with smart cooling features such as mechanisms and software that allows you to control the unit online or using your smart mobile gadget such as your Smartphone while on the go. Others come with a programmable thermostat, allowing you to set different temperature settings for different rooms and so on.

All these are pointers worth considering before and during air conditioning installation, especially when choosing an AC system for your home.